Common Bearing Material Performance Comparison Table
Performance | Unit | GCr15 | 9Cr18 | Si3N4 | ZrO2 |
density | g/cm3 | 7.8 | 7.9 | 3.2 | 6 |
Thermal expansion | 10-6/ | 11 | 17 | 3.2 | 10.5 |
Elastic Modulus | GPa | 208 | 200 | 320 | 210 |
Poisson's ratio | 0.3 | 0.3 | 0.26 | 0.3 | |
hardness | 800 | 700 | 1700 | 1300 | |
Bending strength | MPa | 2400 | 2600 | 900 | 1000 |
Compressive strength | MPa | 3500 | 2000 | ||
toughness | Nm/cm2 | 20 | 25 | 7 | 11 |
Thermal conductivity | W/mk | 30-40 | 15 | 3.5 | 2.5 |
Specific resistance | mm2/m | 1 | 0.75 | 1018 | 1015 |
Specific heat | 450 | 450 | 800 | 400 | |
Operating temperature | 120 | 150 | 1000 | 800 | |
Corrosion | no | weak | Strong | Strong | |
Number of stress cycles | 10*106 | 10*106 | 50*106 | 50*106 | |
Flow contact fatigue failure mode | difference | Peel off | Peel off | Peeling/fracture | |
magnetic | Have | Have | no | no | |
Dimensional stability | difference | difference | good | good | |
Insulation | Not insulated | Not insulated | good | good |